SHANGHAI CHONGYANG WATER TREATMENT EQUIPMENT CO.,LTD
PROFESSIONAL INNOVATION EXCELLENT SERVICE
Add to Cart
Product Name:Double RO Single RO Food And Beverage Water Treatment System for Pure Drinking Water
What is the ideal temperature range for the incoming water?
The ideal temperature range for the incoming water in a reverse osmosis (RO) system is typically between 4°C (40°F) and 38°C (100°F). Water that is too cold can cause the RO membrane to become less permeable, reducing the flow rate of the system and potentially causing damage to the membrane. Water that is too hot can also cause problems, as higher temperatures can make the membrane more permeable to contaminants, reducing the effectiveness of the system and potentially allowing harmful substances to pass through.
In general, the ideal temperature range for the incoming water will depend on the specific RO system and the manufacturer's recommendations. It is important to consult the system's documentation or contact the manufacturer to determine the appropriate temperature range for your particular system.
The Partial Product Specification:
| Type | Capacity (M3/H) | Pipe DN (mm) | WP (MPa) | Material | Work Method |
| CY-RO-0.25 | 0.25 | DN20 | ≤1.0 | Stainless Steel/Carbon Steel | Full Auto/Semi Automatic |
| CY-RO-0.5 | 0.5 | DN20 | ≤1.0 | Stainless Steel/Carbon Steel | Full Auto/Semi Automatic |
| CY-RO-1 | 1 | DN25 | ≤1.0 | Stainless Steel/Carbon Steel | Full Auto/Semi Automatic |
| CY-RO-2 | 2 | DN32 | ≤1.0 | Stainless Steel/Carbon Steel | Full Auto/Semi Automatic |
| CY-RO-3 | 3 | DN40 | ≤1.0 | Stainless Steel/Carbon Steel | Full Auto/Semi Automatic |
| CY-RO-5 | 5 | DN50 | ≤1.0 | Stainless Steel/Carbon Steel | Full Auto/Semi Automatic |
| CY-RO-10 | 10 | DN75 | ≤1.0 | Stainless Steel/Carbon Steel | Full Auto/Semi Automatic |
| CY-RO-20 | 20 | DN100 | ≤1.6 | Stainless Steel/Carbon Steel | Full Auto/Semi Automatic |
| CY-RO-30 | 30 | DN125 | ≤1.6 | Stainless Steel/Carbon Steel | Full Auto/Semi Automatic |
| CY-RO-40 | 40 | DN150 | ≤1.6 | Stainless Steel/Carbon Steel | Full Auto/Semi Automatic |
| CY-RO-50 | 50 | DN200 | ≤1.6 | Stainless Steel/Carbon Steel | Full Auto/Semi Automatic |
FAQ:
1.Question:How often should I replace the filters in a reverse osmosis system?
Answer:As a general guideline, it's recommended that the pre-filter and post-filter be replaced every 3-6 months.
2.Question:How to maintain the big capacity Reverse Osmosis System ?
Answer: 1.Regularly check the system for leaks 2.Monitor water pressure 3.Inspect and clean the pre-filters.
3.Question: How to install RO Plant?
Answer:Install the RO system equipment, including pre-filters, pumps, membranes, and post-filters, according to the manufacturer's instructions and any applicable regulations,we can provide video by wechat ,whatsapp number on-line .
4.Question: Where is the CHONGYANG Water located ?
Answer: SHANGHAI ,JIANGSU